http://www.teamworkersusa.com/sidewall-string/
How to: String a Lacrosse Pocket Step by Step Guide
This is a short article describing some key objectives of stringing the topstring of a Lacrosse stick. If you are interested in stringing a stick with clear pictures and detailed descriptions, please visit TheLacrosseGuy-ide website below.
1.) Take the mesh and fold the top over 2-3 rows. For the purpose of this guide, you should have 10 holes across the top.
2) The first step in stringing a lacrosse stick is to attach the mesh to the scoop of the head. To start, tie a figure 8 knot on one end of the lace and pull the other end thorough the first sidewall hole as shown in Figure 2 & 2a.
Figure 2, the lace should be pulled through the folded mesh so the string comes from underneath the mesh.
3) Figure 3, once through the first mesh hole bring the lace back over the sidewall rail illustrated by the white arrow and insert in the 2nd sidewall hole with the blue arrow shown in Figure 3a. One through the second sidewall hole, bring the lace through the 1st mesh diamond for a second time from underneath.
4.) Figure 4 shows that the first mesh diamond is anchored to the side of the lacrosse head
5) Now its time to attach the mesh to the scoop holes. Take the position of the lace shown in Figure 4 and push it through the 2nd mesh hole, bringing the lace underneath the scoop and pulling it though the 1st large scoop hole. Figure 5
6) Pull the lace from the scoop hole (Pink) and bring it under the previous segment of lace (Red) so that it resembles Figure 6, making sure that the string is as tight as possible.
7.) Continue to now bring the lace over the backside of the mesh and push it through the 4th mesh hole indicated in a white number 4. Bring the lace under the scoop and pull it through the 2nd scoop hole indicated by the orange number 2.
Pull the lace from the scoop hole and bring it under the previous segment of lace so that it resembles Figure 6, making sure that the string is as tight as possible.
8.) Continue to bring the mesh through the 7th mesh hole underneath through the 3rd large scoop hole and then under the previous segment of lace. Pull tight.
9) Continue to push the lace though the 9th mesh hole and bring the lace underneath the 4th large scoop hole. Then pull the lace under the previous segment of lace. Pull tight.
10) Push the lace (Neon Green) through the last mesh hole and through the 1st sidewall hole.. Once through tie a knot at the end. The first part of the topstring is complete. Be sure that all the lace segments are tight for a consistent pocket.
Now if you wish you may add a second string across the top for an added measure of durability.
However if you choose not too, you must anchor the last mesh hole to the sidewall.
Making a knot at the end of the second lace, push the lace through the 2nd sidewall hole and up though the 1st mesh hole. As illustrated by the white arrow, bring the lace over the sidewall and through the 2nd sidewall wall and up through the first mesh hole again.
11) The 2nd string has now anchored the mesh to the sidewall hole. Use the extra lace as an added reinforcement by doing steps 4-10 from the left.
Push the lace (Orange) though the 2nd mesh hole and under through the 1st scoop hole. Then bring the lace (Purple) under the previous segment of lace.
12) Continue by pushing the lace (Yellow) though the 5th mesh hole and under through the 2nd scoop hole. Then bring the lace (Blue) under the lace colored in yellow.
13) Continue following the illustrations.
14) Continue to follow the illustration.
15) Finally pull the lace through the 10th mesh hole and knot it through the sidewall hole.
About the Author
For lacrosse mesh tutorials, and more lacrosse information visit “www.thelacrosseguy-ide.com”
STX Stringing with Tizzle :: Sidewalls
|
|
Broan 507 Chain Operated Utility Fan $84.35 - 250 CFM 7.0 Sones – 8-3/8 inch diameter sleeve. – Specially designed polymeric fan blade. – Housing features foam-insulated door for energy efficiency. – Pull-chain opens door and turns on fan no wall switch to wire. – Housing adjusts to fit walls from 4-1/2 inch to 9-1/2 inch thick. – UL listed…. |
|
|
SportStop 100yd Lacrosse Stringing Sidewall Spool 100yd Sidewall Spool High Quality 100 yards of high quality sidewall. Sidewall string is used to string up pockets containing mesh. Sidewall is a little thicker than Crosslace and is a little thinner than Top String…. |
